Hawke 153/RAC H-M90 Nickel Plated Industrial (67.0-77.6/75.0-89.5)

Hawke 153/RAC H-M90 Nickel Plated

Industrial (67.0-77.6/75.0-89.5)

Varunummer: 153/RAC-HM90NP

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.

Features

Provides armour clamping using  one clamping arrangement for all armour/braid types.
Provides a seal on the cables inner sheath.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

Materials & Finishes

The 153/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

Technical Data

  1. Construction and Test Standards:
    EN 62444, BS 6121 : Part 1 Type E1W, E1X, E1Y and E1Z.
  2. Ingress Protection:
    IP66, IP67 and 
    IP 68  (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
  3. Operating Temperature Range:
    -60°C to +80°C
  4. Deluge Protection to:
    DTS01 (Deluge seal optional).
  5. Assembly Instruction Sheet:
    AI 399.

CABLE GLAND SELECTION TABLE
Size
Ref.
Entry Thread
Size
Cable Acceptance Details ‘G’
Compressed
Length
Hexagon
Dimensions
Metric NPT
*
Inner Sheath'A' Outer Sheat'B' Armour / Braid ‘C’ Across
Flats
Across
Corners
Standard Option Standard Seal Alternative Seal (S) Min. Max. Orientation 1 Orientation 2
Os M20² ½" - 3.0 8.0 - - 5.5 12.0 0.8/1.25 0.0/0.8 52.0 24.0 26.5
O M20² ½" - 6.5 11.9 - - 9.5 16.0 0.8/1.25 0.0/0.8 52.0 24.0 26.5
A M20 ¾" ½" 10.0 14.3 8.5 13.4 12.5 20.5 0.8/1.25 0.0/0.8 53.0 30.0 32.5
B M25 1" ¾" 12.5 20.2 9.5 15.4 16.9 26.0 1.25/1.6 0.0/0.7 69.5 36.0 39.5
C M32 1¼" 1" 19.0 26.5 14.5 21.2 22.0 33.0 1.6/2.0 0.0/0.7 64.0 46.0 50.5
C2 M40 1½" 1¼" 25.0 32.5 22.0 28.0 28.0 41.0 1.6/2.0 0.0/0.7 68.3 55.0 60.6
D M50 2" 1½" 31.5 44.4/42.3¹ 27.5 34.8 36.0 52.6 1.8/2.5 0.0/1.0 79.0 65.0 70.8
E M63 2½" 2" 42.5 56.3/54.3¹ 39.0 46.5 46.0 65.3 1.8/2.5 0.0/1.0 78.9 80.0 88.0
F M75 3" 2½" 54.5 68.2/65.3¹ 48.5 58.3 57.0 78.0 1.8/2.5 0.0/1.0 83.7 95.0 104.0
G M80 3½" - 67.0 73.0 - - 75.0 89.5 2.0/3.5 0.0/1.0 95.6 106.4 115.0
H M90 3½" - 67.0 77.6 - - 75.0 89.5 2.0/3.5 0.0/1.0 95.6 115.0 130.0
J M100 4" - 75.0 91.6 - - 88.0 104.5 2.5/4.0 0.0/1.0 95.6 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches).

¹Smaller value is applicable when selecting reduced NPT entry option.
²Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm