KEY FEATURES

Reliable LED floodlight, low cost of

ownership

Low power consumption due to highly

efficient LED lights source and lens system

Double entry for looping purposes to other

floodlights

Low profile design (<150 mm) allows direct

mounting on helideck

Offshore resistant, high quality coating on

cast light alloy base

Certified for Zone 1 and 2 areas with gas

explosion hazard

Stainless steel (SS316) mounting facilities to

prevent corrosion problems

Wide beam spread for optimised and even

helideck illumination

ELECTRICAL CHARACTERISTICS

Operating voltage: see table

Power consumption: see table

Connection details: M4; two M20x1,5

entries to allow looping

Earth connection: internal M4 and external

M5

STANDARDS/CERTIFICATION

Complies with ICAO Annex 14, Volume ll;

International standards and recommended

practices: Aerodromes, July 2013, chapter 5,

paragraph 5.3.9 – Helideck Floodlights*

Complies with Norway – BSL D 5-1 –

Regulations relating to helicopter aviation –

use of offshore helidecks, Section 36

Complies with USA – HSAC RP 161 – New

Build Helideck Design Guidelines, Section

7.3

Complies with CAA-UK CAP 437 9th edition;

general maintenance flood lighting, Chapter

4, § 4.23 & 4.24.

Complies with Brazil – NORMAM-223/DPC –

Maritime Authority Standards for

Registration Of Helidecks, Section 5.5

Complies with UAE – CAAP 71 – Helidecks

(off-shore) – Chapter 13, Section 2

EN 60079-0, EN 60079-7, EN 60079-18

CML 23ATEX5561X; ATEX II 2 G Ex eb mb IIC

T5 Gb

IEC 60079-0, IEC 60079-7, IEC 60079-18

IECEx CML 23.0198X; Ex eb mb IIC T5 Gb

ABNT NBR IEC 60079-0, ABNT NBR IEC

60079-7, ABNT NBR IEC 60079-18

Inmetro NCC 25.0108 X

PHYSICAL CHARACTERISTICS

Dimensions (L x W x H): 256 x 278 x 147 mm

Weight: 8 kg

Degree of protection: IP66

Operating temperature range: -25°C to

+55°C

PERFORMANCE CHARACTERISTICS

Steady burning; white

Highly efficient LED light source and lens

system

No glare

SYSTEM DESIGN, CONTROL AND

MONITORING

*) When used in a floodlight system, based

on advised number of lights at defined

positions, the average horizontal

illuminance of the floodlighting will meet

the regulatory requirements of at least 10

lux, with a uniformity ratio (average to

minimum) of not more than 8:1 measured

on the surface of the TLOF.